Laser Trimming a Stamped Car Door Panel: One Robot, a Cutting Head and a Stand
How one robot traces the contour of a stamped car door panel with a laser cutting head — the pass, the sparks at the edge, and three decisions that keep the cell repeatable.
Battery Module Handling: One Robot Between a Conveyor and a Station
How one six-axis robot inside a safety fence moves grouped battery modules between a conveyor line and a station — the loop, the end-of-arm tool and how the line shares the cycle.
Painting Motorcycle Brake Parts: One Robot on the Hanger Line
How a paint booth paints rows of motorcycle brake parts on a hanger line with one six-axis robot — the loop, how the parts hang, how the gun sweeps and where the overspray ends up.
Welding Large Steel Structures: Multiple Robots, Multiple Stations
How a shop welds large box- and angle-section steel members with several six-axis robots on positioners — the loop, clamping and turning the part, torch reach and how the stations divide the work.
Appliance Assembly Line: One Pallet, One Station at a Time
How a robot assembly line builds a small appliance — pallets, pick-and-place, pressing, screwdriving, a flip and final packing — plus three design decisions on pallet location, where vision belongs, and cycle balance.
Delta Robot Picking Off a Moving Belt: Loose In, In Line Out
How a delta robot picks wrapped snack packs off a moving conveyor and sets them down evenly for the next machine — the loop, three design decisions on tooling, arrival spacing and placement, and what to send for a cycle-time estimate.
Before the Image: Control Ambient Light in Inspection Cells
Survey windows, overhead lamps and nearby lights, then decide enclosure and shrouding before tuning images with a robot-carried inspection light.
One Cell, Several Dies: Plan Die-Casting Changeover
List grip areas, receiving stand support, downstream orientation and the tool interface for each casting before planning a multi-die die-casting cell.
Support Between Stations: Plan Long-Sheet Feeding
Map leading edge, body and tail support while an intact long sheet travels between rollers and the machine entry.
Around the Corners: Specify Robotic Coating Requirements
Define coating requirements by workpiece region, including corners, hanging contacts and inspection coverage, before selecting robotic spray settings.
Fastening Hose Changes: A Configuration Handoff Record
Document changed hose fixing points, comparable tool positions, unresolved observations and the maintenance handoff disposition after a service-routing change.
Small-Part Handling: Pickup and Placement References
Pair incoming visual features with receiving fixture references when reviewing small-part handling, lighting and physical coordinate relationships.