Embodied AI This Week — Five Storylines: NVIDIA Cosmos 3, Unitree IPO, BMW × Hexagon AEON (Jun 1–7, 2026)

NVIDIA Cosmos 3 + Isaac GR00T reference humanoid debut, Unitree IPO at registration stage, BMW deploys Hexagon AEON at Leipzig, Agibot GE 2.0 tops WorldArena — five embodied AI storylines for Jun 1–7, 2026.
Collaborative Robot Safety: ISO/TS 15066 Guide (2026)

Collaborative robot safety in 2026: the four ISO/TS 15066 methods, why a cobot is not automatically safe, and how to run a cell risk assessment.
Robot Die-Casting Tending: IP67 Extraction Out of the Heat Zone

An IP67 die-casting tending robot extracts hot castings from the die, out of the steam and oil zone. See protection, gripping and ROI rules for when it pays.
Robot Material Handling: 2026 Automation Guide

A 2026 guide to robot material handling: how to automate loading, sorting, and transfer, which type fits each task, and how to size payload and reach.
Delta Robots Explained: High-Speed Picking Guide (2026)

What delta robots are, how parallel-arm kinematics reach 100+ picks per minute, and where high-speed sorting and packaging applications fit in 2026.
SCARA vs Delta vs 6-Axis Robots: How to Choose (2026)

SCARA vs delta vs 6-axis robots compared for assembly and high-speed picking: speed, reach, payload, and which type fits which task in 2026.
Headstock-Tailstock Positioner: Weld Long & Cylindrical Parts All Round

A headstock-tailstock positioner clamps long or cylindrical parts and rotates them so a robot welds the full circumferential seam in one setup. See sizing and uses.
Robot Reach Too Short? A Ground Rail Multiplies the Working Range

When a robot can’t reach a big part or long line, a ground rail (7th axis) multiplies its working range. See load classes, accuracy and when a rail beats a bigger arm.
Embodied AI vs Traditional Industrial Robots (2026)

Embodied AI vs traditional industrial robots in 2026: how learned control differs from programmed automation, and what changes on the factory floor.
How to Choose an Industrial Robot: Selection Guide 2026

How to choose an industrial robot in 2026: match payload, reach, axes, and speed to the application, and know when SCARA, 6-axis, delta, or a cobot fits.
Cobot Payload Guide: Choosing 3kg-30kg Cobots (2026)

How to choose collaborative robot payload from 3 kg to 30 kg, why payload and reach trade off, and which cobot class fits assembly and tending.
Cobot vs Industrial Robot: How to Choose (3-Factor Guide)

Cobot vs industrial robot? Choose by payload, environment and flexibility. A 3-factor decision guide with a comparison table, standards and selection rules.