Automated Deburring Machine for Die Castings (Multi-Station, 5-Axis)

The EVST automated deburring machine is an enclosed, CNC-controlled machine that removes the burrs left on die castings and molded or machined cosmetic parts. The parts sit in dedicated fixtures while the spindles move on programmed machine axes, and on multi-station models several parts are finished in the same cycle.

也称为 multi-station deburring machine,以 5-axis deburring machine 或者 dedicated deburring machine. EVST selects the configuration, fixtures and loading method for each project based on your parts and output targets.

型号 Six-axis single-station (three frame sizes); A/B rotary-table dual-station; 5-axis four-station and six-station
零件 Aluminum high- and low-pressure die castings; cosmetic parts in aluminum, plastics and other materials
删除 Flash, heat-check fins, gate remnants and parting lines; gate marks, tool marks and burrs on cosmetic parts
装载 By hand, or by a robot through an A/B rotary table

Send your part for a deburring machine quote

What is an automated deburring machine, and when is it the right choice?

An automated deburring machine is a special-purpose CNC machine built to take off the flash, gate remnants, parting lines and other burrs that casting or molding leaves on a part. The part is clamped in a dedicated fixture and the spindles move on programmed machine axes inside a closed cabin. On multi-station models, every station cuts at the same time, so one cycle finishes several parts. That suits work where the same part family comes back in volume and the fixtures can be designed around it.

Five-axis four-station deburring machine working on aluminum die castings.

Dedicated machine or robot cell?

A dedicated deburring machine is usually the better fit when:

  • the same castings or cosmetic parts repeat in volume, so purpose-built fixtures pay for themselves;
  • the parts are small enough to clamp several at once, or a large housing can be finished in one setup;
  • you want several parts per cycle in an enclosed, guarded machine.

A robot cell is usually the better fit when:

  • the part mix is wide or the product changes often;
  • the parts are large or awkward to fixture inside a machine cabin;
  • burr positions shift from casting to casting, so the path has to be generated from a scan of each part.

The two are not exclusive. In lines we have built, a robot destacks the castings and feeds the machines (see linking the machine to a robot). For robot-based deburring of large castings, scan-generated paths and post-weld grinding, see the 机器人去毛刺单元.

Which machine configuration fits your parts?

The deburring machines we have built fall into three families. The family follows the part: large die-cast housings, small die castings, or cosmetic parts. Within a family, the frame, the number of stations and the axes are then chosen for each project based on your parts and output targets.

配置Motion and stations典型零件它移除了什么装载
Single-station six-axis machine, three frame sizesSix axes, one part per setupCar and small-engine blocks, transmission housings, other die castings of different sizesFlash, heat-check fins, gate remnants, parting linesBy hand or by robot
A/B rotary-table dual-station machineTwo stations on a rotary table on the larger frameLarger aluminum die castingsBurrs; grindingOne side loads while the other side is processed; suited to robot loading
Dual-station machine with an external axisLarger frame plus an external axisLarger aluminum die castingsBurrs; two parts processed in one clamping每个项目
5-axis four-station machine for die castingsFive axes, four stations cutting at onceSmall automotive and motorcycle die castings, hardwareFlash, heat-check fins, gate remnants, parting linesFixture bar loaded by hand through the front doors
5-axis six-station machine, 3D contoursFive axes, six stations cutting at oncePhone housings, e-cigarette housings, automotive plastic parts, power-bank housingsGate marks, tool marks, burrs每个项目
5-axis four-station machine, 2D contoursFive axes, four stations cutting at onceCamera housings, set-top-box housings, e-cigarette housings, door handlesGate marks, tool marks, burrs每个项目

Six-axis single-station machines for engine blocks and housings

For large die-cast housings, such as engine blocks for cars and small engines and transmission housings, the single-station machine works one clamped part at a time with six axes of tool motion. It is built in three frame sizes, so the frame is matched to the size of the casting. It removes the four burr types die casting leaves behind: flash, heat-check fins, gate remnants and parting lines.

A/B rotary-table and external-axis dual-station machines

On the larger frame, an A/B rotary table gives the machine two stations. While the part on one side is being deburred, the finished part on the other side is taken off and a new casting clamped, so loading happens inside the cycle rather than after it. That is what lets a robot tend the machine inside a production line. A second version adds an external axis to the large frame and processes two parts in a single clamping.

Rendering of an A/B rotary-table dual-station deburring machine with its doors open, one station for loading while the other is processed
Rendering: A/B rotary-table dual-station machine

5-axis four-station machines for small die castings

For small automotive and motorcycle die castings and hardware parts, a five-axis machine with four stations finishes four parts in each cycle, taking off flash, heat-check fins, gate remnants and parting lines. When the product changes, the machine can be switched over to the new part type.

5-axis multi-station machines for cosmetic parts

On cosmetic parts in aluminum, plastics and other materials, gate marks, tool marks and burrs are appearance defects on the finished housing. Two five-axis machines cover this work, split by the shape of the surface:

  • 3D contours, six stations: phone housings, e-cigarette housings, automotive plastic parts and power-bank housings.
  • 2D contours, four stations: camera housings, set-top-box housings, e-cigarette housings and door handles.

On the four-station cosmetic machine, the contour is followed under CNC control, and a circulating water system filters and settles the grinding dust. Both machines can be switched between product types. For polishing fixtures and finish control on phone housings, see 手机壳抛光.

Rendering of a 5-axis multi-station deburring machine for 3D-contour cosmetic parts, door open to show the part fixtures
Rendering: 5-axis machine for 3D-contour cosmetic parts
Rendering of a 5-axis four-station deburring machine for 2D-contour cosmetic parts such as camera and set-top-box housings
Rendering: 5-axis four-station machine for 2D-contour cosmetic parts

Inside a 5-axis four-station deburring machine

The footage and stills on this page come from a five-axis four-station machine deburring aluminum die castings.

  • Four spindles moving as one set. The spindle heads, marked T1 to T4, sit side by side above the parts and move together rather than each on its own, so the four stations cut four identical castings at once.
  • A fixture bar that turns. The castings are clamped side by side along one long fixture bar under the spindles. The bar rotates to present further faces of the castings to the spindles, so more than one face is deburred in a single clamping.
  • Tool changes inside the cabin. A row of tool holders stands behind the spindles, and the spindles change tools from this rack during the cycle.
  • Loading through the front doors. On this machine an operator loads the fixture bar by hand; a robot-loaded layout is shown below.
Four spindles of a 5-axis four-station deburring machine cutting aluminum die castings clamped along a fixture bar
Four spindles cutting together on aluminum die castings
Row of aluminum die castings clamped on the fixture bar of a multi-station deburring machine, turned toward the camera
Castings clamped along the fixture bar
Rack of tool holders behind the spindles inside a 5-axis four-station deburring machine
Tool holders racked inside the cabin for tool changes

Four or six stations: how many does a 5-axis deburring machine need?

In the machines built to date, the station count follows the part type: four stations for small die castings, six stations for cosmetic parts with 3D contours, and four stations for cosmetic parts with 2D contours. All stations cut at once, so each cycle finishes as many parts as there are stations loaded.

For your part, four things decide the configuration:

  1. Surface shape: whether the faces to finish are 2D or 3D contours.
  2. Part and fixture size: the part, in its fixture, has to fit one station.
  3. 输出目标: how many parts per shift you need, against the cycle time of one full load.
  4. 零件号: how many different parts will share the machine and how often it changes over.

EVST confirms the station count, the fixtures and the cycle on your actual parts for each project.

Linking the machine to a robot and the line

A deburring machine does not have to be loaded by hand. For unmanned loading, the systems we have built pair one robot with two machines. The robot takes castings off the incoming pallet, with 3D vision finding each one before the pick, feeds both machines in turn, and stacks finished parts on the outgoing pallet. With an A/B rotary-table machine, the robot loads one side while the other side is still cutting. How many machines one robot can serve is worked out from the cycle times of your parts.

Rendering of a robot destacking castings and loading two automated deburring machines, with incoming and outgoing pallets
Rendering: one robot loading two deburring machines

相关阅读: one operator running several machines with a robot 和 balancing a dual-station motor-housing grinding cell.

What to send for a deburring machine quote

A quote for an automated deburring machine starts from your parts. Send what you have of the following:

  • Part drawings or 3D models, and photos of a part with the burrs to be removed marked
  • Material and process: aluminum high- or low-pressure die casting, plastic molding, machined aluminum, or other
  • What has to come off (flash, gates, parting lines, gate marks, tool marks) and how the result is accepted: visual standard, edge condition or surface roughness
  • Annual volume, target output per shift, and the number of part numbers that will run on the machine
  • Loading: by hand, or by a robot; the upstream and downstream processes the machine connects to
  • Site conditions: floor space and power supply

Sample parts help confirm the fixture design and tool approach before the configuration is fixed.

规格

名称价值
型号Six-axis single-station (three frame sizes); A/B rotary-table dual-station; dual-station with external axis; 5-axis four-station; 5-axis six-station
Parts processed per cycle1 (single-station); 2 with the external-axis version; 4 or 6 on multi-station machines
材料种类Aluminum high- and low-pressure die castings; aluminum, plastics and other materials for cosmetic parts
营运部Flash, heat-check fins, gate remnants, parting lines; gate marks, tool marks, burrs
通过积极争取让商标与其相匹配的域名优先注册来维护数控
Spindles (5-axis four-station die-casting machine)Four spindles moving together; tools changed from an in-cabin rack
Fixture (5-axis four-station die-casting machine)Fixture bar rotates to present further faces of the castings in one clamping
水系统Circulating water with dust filtration and settling (four-station cosmetic machine)
装载By hand; A/B rotary table for loading during the cycle; robot loading with 3D-vision pallet picking
零件最大尺寸和重量根据要求
Spindle power and speed, axis travel根据要求
周期Assessed per project on your parts

Configurations listed are those built to date; the machine for your parts is selected for each project based on your parts and output targets.

常见问题

What is an automated deburring machine?

An automated deburring machine is a special-purpose CNC machine that removes burrs, flash, gate remnants and parting lines from cast, molded or machined parts. The parts are held in dedicated fixtures and the spindles move on programmed machine axes in an enclosed cabin. EVST builds single-station six-axis, A/B rotary-table dual-station, and 5-axis four- and six-station configurations.

Robotic deburring cell or multi-station deburring machine: which fits aluminum die castings at my volume and part mix?

Choose a multi-station deburring machine when the same small castings run in volume and several can be clamped at once; a five-axis four-station machine finishes four per cycle. Choose a robotic deburring cell for large castings, a wide part mix, frequent changeovers, or castings whose burr positions vary enough to need a scan of each part. Large housings can go either way: a six-axis single-station machine or a robot cell, decided on access and part mix. See the 机器人去毛刺单元 for the robot route.

How many stations should a 5-axis deburring machine have for small die-cast or 3C parts, four or six?

In the machines built to date, small die castings run on four stations, 3C cosmetic parts with 3D contours on six, and those with 2D contours on four. Every station cuts at once, so more stations means more parts per cycle, provided each part and its fixture fit one station. The final count is confirmed on your parts.

What is the difference between the 2D-contour and 3D-contour machines?

Both are five-axis multi-station machines for appearance parts made of aluminum, plastics or other materials. The 3D-contour machine has six stations and is used on phone housings, e-cigarette housings, automotive plastic parts and power-bank housings. The 2D-contour machine has four stations and is used on camera housings, set-top-box housings, e-cigarette housings and door handles.

Can one machine handle several different parts?

Yes. Each multi-station machine can be changed over to another product type by swapping the fixtures and the program for the new part. How many part numbers can share one machine, and how often it can change over, is assessed on your part list.

Can one clamping deburr more than one face of a casting?

Yes, on the 5-axis four-station machine for die castings. The fixture bar holding the castings rotates to turn further faces toward the spindles, and the spindles change tools from the rack in the cabin, so several faces are finished without unclamping. Which faces can be reached in one clamping is checked against your part drawings.

Can a robot load an automated deburring machine?

Yes. With an A/B rotary-table machine, a robot loads one side while the other side cuts. In lines we have built, one robot destacks castings with 3D vision, feeds two machines and stacks the finished parts.

What burrs does the machine remove from die castings?

On aluminum die castings it removes four kinds: flash, the thin fins of metal where die halves and cores meet; heat-check fins, raised lines copied from a cracked die surface; gate remnants; and parting lines. On cosmetic parts it removes gate marks, tool marks and burrs.

How much does an automated deburring machine cost?

The price depends on the configuration (single-station, dual-station or multi-station), the frame size, the number of stations, the fixtures for each part number, and whether a robot and pallet handling are included. EVST quotes per project after reviewing your parts; 联系我们 with drawings and your annual volume. Lead time and warranty are confirmed in the quotation.

相关

Configurations on this page are those built to date; the machine for your parts is selected and confirmed for each project.

EVST 标志
隐私概述

本网站使用cookies,以便我们能够为您提供尽可能最佳的用户体验。 Cookies存储在您的浏览器中,执行的功能包括在您返回我们的网站时识别您的身份,并帮助我们的团队了解您觉得哪些网站最有趣和最有用的部分。