Horizontal Cartoning Machine (Intermittent and Continuous)

The EVST horizontal cartoning machine opens each carton, loads the product into it horizontally and closes it, with leaflet insertion, coding and inspection added as needed. It is built in two versions: an intermittent cartoner for contact lenses, dental implants and other medical devices, and a continuous cartoner for sachets, pouches and kits.

버전 Intermittent (servo-driven); continuous (multi-pusher)
속도 50 cartons/min intermittent; 120 cartons/min continuous (depending on carton size)
Carton size (L × W × H) 60–220 × 25–120 × 16–70 mm across the versions
에 대한 링크 Vision inspection, 2D-code traceability, labeling and case packing

Send your product for a cartoner quote

What is a horizontal cartoning machine?

A horizontal cartoning machine is a cartoner in which the carton lies on its side while the product goes in. The machine opens a flat carton blank, the product is typically pushed in through the open end, and the end flaps are closed or glued. The exact process steps are configured for each product and project. This layout suits products that lie flat or are packed in blisters, sachets and pouches.

EVST builds the horizontal cartoner in two versions, both servo-controlled:

  • Intermittent: 50 cartons per minute, suited in particular to contact lenses and dental implants and other medical devices, where every carton is coded and checked.
  • 마디 없는: 120 cartons per minute, for sachets, candy pouches, snack packs and kits, where several pushers load product into the cartons without stopping.

For how it compares with a vertical cartoner, see the 포장 기계 개요.

Schematic of a horizontal intermittent cartoning machine numbered 1 to 5: product infeed, carton opening, servo cartoning, coding and vision check, reject and output
Schematic: horizontal intermittent cartoning machine

Intermittent and continuous versions

Intermittent, smaller-carton range Intermittent, larger-carton range 끊임없는
Carton size (L × W × H) 70–160 × 25–100 × 16–40 mm 60–220 × 25–120 × 20–70 mm 100–220 × 25–120 × 25–65 mm
속도 50개 상자/분 50개 상자/분 120개 상자/분
운전 및 제어 Servo system, simplified mechanism with fewer wear parts Same as smaller-carton range Servo main drive with overload protection; electronic cam, one-key speed setting on the HMI
전형적인 제품 Contact lenses, dental implants, Class III medical devices Same as smaller-carton range Sachets, candy pouches, snack packs, personal-care gift sets, plug-in mosquito repellent kits

Speeds depend on carton size.

Intermittent: built around inspection and traceability

The intermittent cartoner is designed to sit in a line where every carton is identified and checked. It links directly with vision inspection and a 2D-code traceability system, and an industrial IoT platform monitors the process in real time. Its servo system and simplified mechanism cut the number of wear parts.

Continuous: built for throughput

The continuous cartoner handles a wide range of carton sizes. Several pushers move product into the cartons without stopping, and an electronic cam links the motions so the operator changes speed with one key on the HMI instead of adjusting a frequency drive. The servo main drive has overload protection, protecting both the product and the machine.

Schematic of a horizontal continuous cartoning machine numbered 1 to 6: product infeed, carton opening, multi-pusher loading, carton closing, missing-product sensors, output
Schematic: horizontal continuous cartoning machine

What the horizontal cartoner is used for

Suitable product formats for the horizontal cartoner:

업종 제품
의료 기기 Contact lenses, dental implants in blisters, Class III device kits with leaflets
의약품 및 보충제 Herbal granule sachets, dietary fiber, collagen and vitamin C sachets
식품 및 과자류 Candy pouches, snack packs, instant soup sachets
가정 및 개인 관리 Foot-soak liquid sachets in gift boxes, baking soda sachets, plug-in mosquito repellent liquid with heater, personal-care gift sets

Contact lenses and dental implants: what the line has to solve

  • Lenses of different powers in identical cartons. Every blister is scanned and the line’s information system matches it to its carton. That is what allows a power change, say from 1.50 D to 2.00 D, to pass through the line without stopping it.
  • Implant blisters of different heights. Each blister is lifted to a set height before cartoning, and the small label is applied at a fixed locating point so it lands in the same place each time.
  • A camera at every step. The Class III device lines described here check the product orientation, the laser code and the printed label on each carton and reject failures automatically. Because every step carries a check, these lines run at a modest pace, and the intermittent cartoner, built for contact lenses and implants, fits that pace. Each reject is logged, so the record shows what was rejected and why.

Earlier implant lines were spread out over a large floor area; current layouts are built compactly, in the same way as the contact lens lines. For the full medical line, from parts presentation and leaflet insertion to UDI (Unique Device Identification) coding and inspection, see the medical device packaging line.

Sachets: counting before cartoning

On sachet lines, each sachet’s code is read and failed sachets are rejected, the sachets climb an incline conveyor, a magazine counts them, and the horizontal cartoner loads each count into a carton. A corner label is printed and applied, and the cartons go on to case erecting, packing and sealing, with the case code read at the end.

Schematic of a sachet cartoning line numbered 1 to 9: sachet code reading and reject, incline conveyor, magazine counting, horizontal cartoning, corner labeling, case erecting, case packing, case sealing, case code reading
Schematic: sachet line built around a horizontal cartoner

Built-in checks

  • No product, no carton (continuous version). Sensors along the machine stop the carton opener when product is missing.
  • Missing carton alarm (continuous version). If there is no carton or a carton is missing, the machine pauses and raises an alarm.
  • 과부하 보호 on the servo main drive (continuous version).
  • Vision and code links for product orientation, codes and labels, with automatic rejection (intermittent version and medical lines).

기술 사양

항목 간헐적 끊임없는
카톤 길이 70–160 mm (smaller range) / 60–220 mm (larger range) 100–220 mm
카톤 폭 25–100 mm (smaller range) / 25–120 mm (larger range) 25–120 mm
상자 높이 16–40 mm (smaller range) / 20–70 mm (larger range) 25–65 mm
속도 50 cartons/min, depending on carton size 120 cartons/min, depending on carton size
드라이브 서보 시스템 Servo main drive with overload protection; electronic cam
Controls and checks Links to vision inspection and 2D-code traceability; industrial IoT platform for real-time process monitoring One-key speed setting on the HMI, no frequency drive adjustment; multi-sensor detection: no product, no carton opened; no or missing carton, pause and alarm

The configuration for your cartons and products is selected and confirmed for each project.

견적을 받으려면 무엇을 보내야 하나요?

  • Product samples, and carton blanks or dielines for every carton size
  • The leaflet, if one goes in
  • Number of SKUs and carton sizes, and target cartons per minute
  • Coding, labeling and inspection needed on the carton
  • What feeds the cartoner (blisters, a counting magazine, a conveyor) and what follows it

Factory testing time grows with the number of SKUs to be run. EVST quotes per project after reviewing your samples.

일반적인 질문

What products suit a horizontal cartoning machine?

Products that lie flat or come in blisters, sachets or pouches: contact lenses, dental implants, medical device kits with leaflets, supplement and herbal granule sachets, candy pouches and snack packs. Upright bottles and tubes usually go on a 수직 카토닝 머신.

How fast is a horizontal cartoning machine?

EVST’s intermittent horizontal cartoner runs at 50 cartons per minute and the continuous version at 120 cartons per minute, both depending on carton size. On medical device lines with a camera at every step, the line speed is set by the checks rather than by the cartoner.

Can the cartoner switch products without stopping the line?

On contact lens lines, yes, for a power change: each blister is scanned and matched to its carton, so the line moves from one power to the next without stopping. A change of carton size is a format change, done within the machine’s carton size range; the formats tested before shipment are agreed for each project.

Can a horizontal cartoner connect to vision inspection and traceability?

Yes. The intermittent cartoner links directly with vision inspection and a 2D-code traceability system, and on medical device lines the carton code is tied to the inner pouch and traceability card through the UDI system.

How is the carton closed?

On a horizontal cartoner the end flaps are typically closed right after loading; the exact process steps are configured for each product and project. On medical device lines we have built, hot-melt glue sealing follows the cartoner where the carton requires it. The closing method is chosen with your carton design.

관련

Speeds and carton sizes are machine figures and depend on the carton. The cartoner for your product is selected and confirmed for each project.

EVST 로고
개인 정보 보호 개요

이 웹 사이트는 가능한 최고의 사용자 경험을 제공 할 수 있도록 쿠키를 사용합니다. 쿠키 정보는 브라우저에 저장되며 웹 사이트로 돌아와서 가장 흥미롭고 유용한 웹 사이트 섹션을 Google 팀이 이해할 수 있도록 도와주는 등의 기능을 수행합니다.