Cobot vs Industrial Robot: Which to Choose 2026
Cobot vs industrial robot in 2026: a decision framework comparing payload, speed, safety, cost, and ROI to choose the right robot for your factory.
How to Pick a Welding Positioner — Load, Torque, Indexing Accuracy & Two-Station Arc-On
EVST EVS-SWP single-axis 200–2000 kg, EVS-DWP dual-axis to 5000 kg. Pick by load + turning torque + indexing accuracy (≤±0.3°). Two-station arc-on doubles cell output.
Collaborative Robot Guide 2026: How Cobots Work
A 2026 guide to collaborative robots: how cobots work, the four ISO/TS 15066 collaboration modes, power-and-force limiting safety, and where they apply.
Robot Tending in Forging — IP67 Protection, Out of the Heat Zone
A standard industrial robot dies within 6 months beside a forging press. IP67 sealed body + positive pressure + compliant float gripper run long-term, with ~2-year typical payback.
Spot vs MIG vs TIG Welding Robots 2026: Process Comparison
How spot, MIG (GMAW), and TIG (GTAW) welding robots differ in 2026: process, material, payload, cycle time, defect modes, and selection criteria.
Welding Robot Guide 2026: 6-Axis MIG/TIG/Spot Uses
A 2026 guide to 6-axis welding robots: MIG, TIG, and spot processes for heavy industry, with selection criteria, integration components, and standards.
Robot Polishing — One Process, Three Products: Cookware, Plates, Auto Parts
Robot polishing carries the same vision + force-control + abrasive logic across cookware, steel plates and auto parts. 2–3× abrasive belt life vs manual polish. How the same cell covers three industries.
How Fast Does a Cobot Pay Back? 6–12 Months & a 5-Question Decision Frame
Industry-typical cobot payback runs 6–12 months. The 5-question frame (cycle, changeover, labor, ISO/TS 15066 compliance, IATF traceability) decides which bracket your station lands in.
Publicly Traded Humanoid Robot Companies 2026 Guide
Which humanoid robot companies are publicly traded in 2026? Listed stocks, pre-IPO names, and the key metrics investors should track.
SCARA Robot Guide 2026: Working Principle, vs Cobots, Uses
What is a SCARA robot, how its 4-axis RRP structure works, how it compares to cobots and 6-axis arms, and where it fits: assembly, packaging, dispensing.
Thick-Plate Multi-Pass Robot Welding: ±0.5 mm Seam Tracking, 99% First-Pass
An industrial welding robot lays multi-pass welds on thick structural steel with ±0.5 mm seam tracking and 99% first-pass acceptance. See how positioners and travel rails extend it.
Automated Powertrain Blank Tending: Unattended & Error-Proof
Cylinder-head and crankshaft blanks are heavy and error-prone to load. See how a robot tends machines unattended, with vision and code error-proofing, and when it pays.