The EVST horizontal cartoning machine opens each carton, loads the product into it horizontally and closes it, with leaflet insertion, coding and inspection added as needed. It is built in two versions: an intermittent cartoner for contact lenses, dental implants and other medical devices, and a continuous cartoner for sachets, pouches and kits.
| leaganacha | Intermittent (servo-driven); continuous (multi-pusher) |
|---|---|
| luas | 50 cartons/min intermittent; 120 cartons/min continuous (depending on carton size) |
| Méid an chartáin (F × L × A) | 60–220 × 25–120 × 16–70 mm trasna na leaganacha |
| Naisc chuig | Vision inspection, 2D-code traceability, labeling and case packing |
A horizontal cartoning machine is a cartoner in which the carton lies on its side while the product goes in. The machine opens a flat carton blank, the product is typically pushed in through the open end, and the end flaps are closed or glued. The exact process steps are configured for each product and project. This layout suits products that lie flat or are packed in blisters, sachets and pouches.
EVST builds the horizontal cartoner in two versions, both servo-controlled:
For how it compares with a vertical cartoner, see the meaisín cartánaithe forbhreathnú.

| Raon cartáin níos lú, eatramhach | Raon cartáin níos mó, eatramhach | Leanúnach | |
|---|---|---|---|
| Méid an chartáin (F × L × A) | 70–160 × 25–100 × 16–40 mm | 60–220 × 25–120 × 20–70 mm | 100–220 × 25–120 × 25–65 mm |
| luas | 50 cartán/nóim | 50 cartán/nóim | 120 cartán/nóim |
| Tiomáint agus rialú | Servo system, simplified mechanism with fewer wear parts | Same as smaller-carton range | Servo main drive with overload protection; electronic cam, one-key speed setting on the HMI |
| Táirgí tipiciúla | Contact lenses, dental implants, Class III medical devices | Same as smaller-carton range | Sachets, candy pouches, snack packs, personal-care gift sets, plug-in mosquito repellent kits |
Braitheann luasanna ar mhéid an chartáin.
The intermittent cartoner is designed to sit in a line where every carton is identified and checked. It links directly with vision inspection and a 2D-code traceability system, and an industrial IoT platform monitors the process in real time. Its servo system and simplified mechanism cut the number of wear parts.
The continuous cartoner handles a wide range of carton sizes. Several pushers move product into the cartons without stopping, and an electronic cam links the motions so the operator changes speed with one key on the HMI instead of adjusting a frequency drive. The servo main drive has overload protection, protecting both the product and the machine.

Suitable product formats for the horizontal cartoner:
| Tionscal | Táirgí |
|---|---|
| Feistí leighis | Contact lenses, dental implants in blisters, Class III device kits with leaflets |
| Cógaisíocht agus forlíontaí | Herbal granule sachets, dietary fiber, collagen and vitamin C sachets |
| Bia agus milseáin | Candy pouches, snack packs, instant soup sachets |
| Cúram teaghlaigh agus pearsanta | Foot-soak liquid sachets in gift boxes, baking soda sachets, plug-in mosquito repellent liquid with heater, personal-care gift sets |
Earlier implant lines were spread out over a large floor area; current layouts are built compactly, in the same way as the contact lens lines. For the full medical line, from parts presentation and leaflet insertion to UDI (Unique Device Identification) coding and inspection, see the líne pacáistithe feistí leighis.
On sachet lines, each sachet’s code is read and failed sachets are rejected, the sachets climb an incline conveyor, a magazine counts them, and the horizontal cartoner loads each count into a carton. A corner label is printed and applied, and the cartons go on to case erecting, packing and sealing, with the case code read at the end.

| Mír | Amach | Leanúnach |
|---|---|---|
| Fad an chartáin | 70–160 mm (smaller range) / 60–220 mm (larger range) | 100–220 mm |
| Leithead an chartáin | 25–100 mm (smaller range) / 25–120 mm (larger range) | 25–120 mm |
| Airde an chartáin | 16–40 mm (smaller range) / 20–70 mm (larger range) | 25–65 mm |
| luas | 50 cartán/nóim, ag brath ar mhéid an chartáin | 120 cartán/nóim, ag brath ar mhéid an chartáin |
| Céide | Seirbhís chórais | Servo main drive with overload protection; electronic cam |
| Controls and checks | Links to vision inspection and 2D-code traceability; industrial IoT platform for real-time process monitoring | One-key speed setting on the HMI, no frequency drive adjustment; multi-sensor detection: no product, no carton opened; no or missing carton, pause and alarm |
The configuration for your cartons and products is selected and confirmed for each project.
Fásann an t-am tástála monarchan de réir líon na SKUanna atá le rith. Luachanann EVST in aghaidh an tionscadail tar éis athbhreithniú a dhéanamh ar do shamplaí.
Products that lie flat or come in blisters, sachets or pouches: contact lenses, dental implants, medical device kits with leaflets, supplement and herbal granule sachets, candy pouches and snack packs. Upright bottles and tubes usually go on a meaisín cartánaithe ingearach.
EVST’s intermittent horizontal cartoner runs at 50 cartons per minute and the continuous version at 120 cartons per minute, both depending on carton size. On medical device lines with a camera at every step, the line speed is set by the checks rather than by the cartoner.
On contact lens lines, yes, for a power change: each blister is scanned and matched to its carton, so the line moves from one power to the next without stopping. A change of carton size is a format change, done within the machine’s carton size range; the formats tested before shipment are agreed for each project.
Yes. The intermittent cartoner links directly with vision inspection and a 2D-code traceability system, and on medical device lines the carton code is tied to the inner pouch and traceability card through the UDI system.
On a horizontal cartoner the end flaps are typically closed right after loading; the exact process steps are configured for each product and project. On medical device lines we have built, hot-melt glue sealing follows the cartoner where the carton requires it. The closing method is chosen with your carton design.
Is figiúirí meaisín iad na luasanna agus méideanna na gcartán agus braitheann siad ar an gcartán. Roghnaítear agus deimhnítear an cartánóir do do tháirge do gach tionscadal.